LoRaWAN®-Based Waste Bin Detector
This LW006-WB sensor is designed for waste bin (trash bin) status detection. It detect full/empty, flame risk, inclined (fall) or not and etc.
With LoRaWAN® module, it transmit the status via gateway to networks server and application server. User can monitor the status remotely.
With the application software, user can assign the collector resource work plan and route plan. Analyze task performance and find out solution to improve. Finally the objective of high efficiency , good environment, and low cost are achieved. It is optional for different frequency, such as 470Mhz (الصين), 868ميجاهيرتز (أوروبا), 915ميجاهيرتز(الولايات المتحدة الأمريكية), 923ميجاهيرتز (Australia,New Zealand). As it is with algorithm of low power consumption, the internal battery can work for more than 5 سنوات (في 4 hours interval upload interval).
Overview | البعد | 115*115*50مم |
|---|---|---|
Net Weight | 150ز | |
اللون | Black | |
Shell Material | عضلات المعدة | |
كاشف | Principle | Ultrasonic @ 112kHz |
Detection Range | 200سم (vertical) | |
Accuracy of height | 3مم | |
Blind area | 15سم | |
Accuracy of temperature | 2℃ | |
Accuracy of angel | 2° (optional) | |
MCU | STM32, 32bit ARM® core controller | |
LoRa Module | Semtech® 1276 | |
Controller | حساسية | -137dbm@292bps (RX), 5~20dbm(Tx) |
مذياع | تكرر | LoRaWAN® CN470/EU868/US915/AS923Mhz |
Working Mode | فئة أ | |
Activation | ABP/OTAA activation; | |
Communication Distance | 3km in view sight; | |
Lifetime for one charge | 5 years at 4 hours report interval. | |
Internal Battery | ER18505M non-recharged Lithium Battery | |
Current | 210mA@3.6V(uploading) | |
-40 ~ +85℃ | ||
Protection Level | IP66 |