LORAWAN®-Based Development Kit
Multiple communication protocols LORAWAN® V1.0.2 and BLE V4.2
Open-source firmware bring your product to market faster
Variety of peripheral interfaces
Arduino NANO connection is compatible
Support AT command to change parameters
MKL62ST-DT is a small, open-source IoT development board specially designed for MOKO LORAWAN®-Based module MKL62BA.
The low-power SMT32 chip is used as the external MCU, and it is integrated with the Sensirion SHT30 temperature and humidity sensor. By running the demo application firmware provided by MOKO, users can quickly familiarize themselves with the LORA®-Based network and see the temperature and humidity sensor data on the LORAWAN®-Based network server.
Users also can connect different external sensors through a rich peripheral interface to quickly design and validate a LORA®-Based node device. navíc, because the Arduino NANO connection is compatible, it will be easy to begin the LORA®-Basedapplication design process.
Supports standard LoRaWAN®-Based protocol
The power supply interface has a complete anti-surge, ESD, and anti-reverse connection, and other protective functions
Provides a lithium-ion battery connection interface, along with an integrated lithium battery charge and discharge management circuit
The CP2102 USB-UART chip provides serial port function to facilitate program downloading and debugging information printing
Provides a SMT32 and LoRaWAN®-Based module serial port program interface
Compatible with the Arduino NANO interface
Offers a variety of peripheral interfaces, including UART, GPIO, ADC, I2C, SPI, and NFC
Offers a variety of on-board peripheral SHT30 sensors, switches, and LEDs
| MCU | STM32L151C8T6A |
| Flash | 64KB |
| RAM | 32KB |
| Zdroj napájení | 3.7V rechargeable Li-battery or Type-C USB |
| Output Voltage | 5V or 3.3V |
| Output Current | Max. 500mA |
| LORAWAN®-Based Module | MKL62BA |
| Protokol | LORAWAN® V1.0.2 and BLE V4.2 |
| LORA® Frequency Band | 868MHZ/915MHZ(setable by AT Command) |
| LORA® TX Power | Max.22dB |
| LORA® Antenna | IPEX interface antenna |
| Peripheral Interface | UART,GPIO,ADC,I2C,SPI,NFC |
| On-board Peripheral | SHT30 Sensor,4xLED,2xSwitch |
| Dimenze | 80x36x12mm |