Domov » W3/W4 Bluetooth Beacon Indoor Positioning
Bluetooth beacon Exhibition Tag-P1
Bluetooth beacon Exhibition Tag-P2

W3/W4 Indoor Positioning Beacon

  • Neck chain and bracelet are available
  • Selectivity mount for ON/OFF button
  • Additional Motion sensors and RFID available
  • Kompatibilné s iBeacon a Eddystone
    (UID, URL, TLM) zároveň.
  • Všetky parametre tohto produktu môžu byť
    upravené prostredníctvom konfigurácie APP

mokosmart beacon

Popis

The W3/W4 indoor positioning beacon is a BLE portable tag with the ultra-low power ARM® chipset NORDIC® nRF52 series. Not only is the case easily portable, the precision hardware and the strong, sturdy firmware support make it easy to use. The W3/W4 positioning beacon is designed for commercial advertising and indoor positioning-based service.

The W3/W4 positioning beacon beams pulses of 2.4GHz signals at user-set intervals, and the W3/W4-iBeacon signal can connect to and be decoded by both iOS and Android BLE-enabled devices.

Poznámka: The key difference between the W3 positioning Beacon and W4 positioning Beacon is that W4 has a push-button, which the W3 positioning beacon does not have.

Vlastnosti

Bluetooth s nízkou spotrebou energie

Čipová sada s mimoriadne nízkou spotrebou energie radu nRF52

Podpora 5url vysielania

Android&IOS SDK provided

Can be turn off beacon via configure App

Aktualizácia firmvéru bezdrôtovo (OTA)

Logo a farba prispôsobiteľné (MOQ)

Za predpokladu vlastnej konfigurácie (MOQ 50 Jednotky)

100% Konfigurovateľné parametre prostredníctvom aplikácie (Android & iOS)

technické údaje

Veľkosť(H * W * L) ø25,93*6,6 mm Protokoly iBeacon & Eddystone: UID, URL, TLM
Model batérie CR2032 Služba GATT konfigurácie Eddystone
Kapacita batérie (mAh) 240mAh (vymeniteľné) Aktualizácia firmvéru OTA
Predvolená životnosť batérie 12mesiacov Metóda pripevnenia Bracelet , keyring and neck chairn
Batéria vymeniteľná Áno Zabudovaný senzor Pohyb LIS3DH
Maximálny rozsah 30m (+4dbm) Doplnková technika RFID, RGB
Vodeodolný Áno
Veľkosť(H * W * L) ø25,93*6,6 mm
Protokoly iBeacon & Eddystone: UID, URL, TLM
Model batérie CR2032
Služba GATT konfigurácie Eddystone
Kapacita batérie (mAh) 240mAh (vymeniteľné)
Aktualizácia firmvéru OTA
Predvolená životnosť batérie 12mesiacov
Metóda pripevnenia Bracelet , keyring and neck chairn
Batéria vymeniteľná Áno
Zabudovaný senzor Pohyb LIS3DH
Maximálny rozsah 30m (+4dbm)
Doplnková technika RFID, RGB
Vodeodolný Áno

W3/W4 Indoor Positioning Beacon Display

Aplikácie

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (that is, the closest), and scans its broadcast information (UUID, Major, Menšie) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (that is, the closest), and scans its broadcast information (UUID, Major, Menšie) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.