Domov » W3/W4 Bluetooth Beacon Indoor Positioning
Bluetooth beacon Exhibition Tag-P1
Bluetooth beacon Exhibition Tag-P2

W3/W4 Indoor Positioning Beacon

  • Neck chain and bracelet are available
  • Selectivity mount for ON/OFF button
  • Additional Motion sensors and RFID available
  • Združljiv z iBeacon in Eddystone
    (UID, URL, TLM) ob istem času.
  • Vsi parametri tega izdelka so lahko
    spremenjeno s konfiguracijo APP

mokosmart beacon

Opis

The W3/W4 indoor positioning beacon is a BLE portable tag with the ultra-low power ARM® chipset NORDIC® nRF52 series. Not only is the case easily portable, the precision hardware and the strong, sturdy firmware support make it easy to use. The W3/W4 positioning beacon is designed for commercial advertising and indoor positioning-based service.

The W3/W4 positioning beacon beams pulses of 2.4GHz signals at user-set intervals, and the W3/W4-iBeacon signal can connect to and be decoded by both iOS and Android BLE-enabled devices.

Opomba: The key difference between the W3 positioning Beacon and W4 positioning Beacon is that W4 has a push-button, which the W3 positioning beacon does not have.

Lastnosti

Bluetooth z nizko porabo energije

Izjemno nizka poraba energije čipset serije nRF52

Podprite oddajanje 5url

Android&IOS SDK provided

Can be turn off beacon via configure App

Posodobitev vdelane programske opreme (OTA)

Barva in logotip po meri (MOQ)

Priložena lastna konfiguracija (MOQ 50 enote)

100% Nastavljivi parametri prek aplikacije (Android & iOS)

Specifikacije

Velikost(V * Š * D) ø25,93*6,6 mm Protokoli iBeacon & Eddystone: UID, URL, TLM
Model baterije CR2032 Storitev GATT za konfiguracijo Eddystone
Kapaciteta akumulatorja (mAh) 240mAh (zamenljiv) Posodabljanje vdelane programske opreme OTA
Privzeta življenjska doba baterije 12mesecev Način pritrditve Bracelet , keyring and neck chairn
Zamenljiva baterija Da Vgrajen senzor Gibanje LIS3DH
Največji domet 30m (+4dbm) Tehnologija dodajanja RFID, RGB
Vodoodporen Da
Velikost(V * Š * D) ø25,93*6,6 mm
Protokoli iBeacon & Eddystone: UID, URL, TLM
Model baterije CR2032
Storitev GATT za konfiguracijo Eddystone
Kapaciteta akumulatorja (mAh) 240mAh (zamenljiv)
Posodabljanje vdelane programske opreme OTA
Privzeta življenjska doba baterije 12mesecev
Način pritrditve Bracelet , keyring and neck chairn
Zamenljiva baterija Da
Vgrajen senzor Gibanje LIS3DH
Največji domet 30m (+4dbm)
Tehnologija dodajanja RFID, RGB
Vodoodporen Da

W3/W4 Indoor Positioning Beacon Display

Aplikacije

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (to je, the closest), and scans its broadcast information (UUID, Major, Minor) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (to je, the closest), and scans its broadcast information (UUID, Major, Minor) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.