บ้าน » W3/W4 Bluetooth Beacon Indoor Positioning
Bluetooth beacon Exhibition Tag-P1
Bluetooth beacon Exhibition Tag-P2

W3/W4 Indoor Positioning Beacon

  • Neck chain and bracelet are available
  • Selectivity mount for ON/OFF button
  • Additional Motion sensors and RFID available
  • Compatible with iBeacon and Eddystone
    (UID, URL, TLM) ในเวลาเดียวกัน.
  • All the parameters of this product can be
    modified via configure APP

mokosmart beacon

คำอธิบาย

The W3/W4 indoor positioning beacon is a BLE portable tag with the ultra-low power ARM® chipset NORDIC® nRF52 series. Not only is the case easily portable, the precision hardware and the strong, sturdy firmware support make it easy to use. The W3/W4 positioning beacon is designed for commercial advertising and indoor positioning-based service.

The W3/W4 positioning beacon beams pulses of 2.4GHz signals at user-set intervals, and the W3/W4-iBeacon signal can connect to and be decoded by both iOS and Android BLE-enabled devices.

บันทึก: The key difference between the W3 positioning Beacon and W4 positioning Beacon is that W4 has a push-button, which the W3 positioning beacon does not have.

คุณสมบัติ

บลูทูธพลังงานต่ำ

Ultra-low power consumption chipset nRF52 series

Support 5url broadcasting

Android&IOS SDK provided

Can be turn off beacon via configure App

อัพเดตเฟิร์มแวร์ Over The Air (OTA)

Logo and color customizable (ขั้นต่ำ)

มาพร้อมกับการกำหนดค่าของคุณเอง (ขั้นต่ำ 50 หน่วย)

100% Configurable Parameters via app (Android & iOS)

ข้อมูลจำเพาะ

ขนาด(H*W*L) ø25.93*6.6 mm โปรโตคอล iBeacon & Eddystone: UID, URL, TLM
รุ่นแบตเตอรี่ CR2032 Eddystone Configuration GATT Service
ความจุของแบตเตอรี่ (mAh) 240mAh (เปลี่ยนได้) อัพเดตเฟิร์มแวร์ OTA
อายุการใช้งานแบตเตอรี่เริ่มต้น 12เดือน วิธีการแนบ Bracelet , keyring and neck chairn
เปลี่ยนแบตเตอรี่ได้ ใช่ เซนเซอร์ในตัว Motion LIS3DH
ช่วงสูงสุด 30ม (+4dbm) Addition Tech RFID, RGB
กันน้ำ ใช่
ขนาด(H*W*L) ø25.93*6.6 mm
โปรโตคอล iBeacon & Eddystone: UID, URL, TLM
รุ่นแบตเตอรี่ CR2032
Eddystone Configuration GATT Service
ความจุของแบตเตอรี่ (mAh) 240mAh (เปลี่ยนได้)
อัพเดตเฟิร์มแวร์ OTA
อายุการใช้งานแบตเตอรี่เริ่มต้น 12เดือน
วิธีการแนบ Bracelet , keyring and neck chairn
เปลี่ยนแบตเตอรี่ได้ ใช่
เซนเซอร์ในตัว Motion LIS3DH
ช่วงสูงสุด 30ม (+4dbm)
Addition Tech RFID, RGB
กันน้ำ ใช่

ดาวน์โหลดเอกสารข้อมูล

http://doc.mokotechnology.com/index.php?s=/9&page_id=34

W3/W4 Indoor Positioning Beacon Display

แอปพลิเคชั่น

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (นั่นคือ, the closest), and scans its broadcast information (UUID, วิชาเอก, ผู้เยาว์) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.

W3/W4 Indoor Positioning Beacon

Information push:
When the user is close to a particular painting, product, or shop, the APP recognizes the W3 Beacon with the best signal (นั่นคือ, the closest), and scans its broadcast information (UUID, วิชาเอก, ผู้เยาว์) through Bluetooth, and then connects to the background server through the network’s corresponding information in the database, displaying the information of the drawing in the APP.

Location information:
Since GPS positioning is not ideal for indoor use, the above map can refer to the indoor map, and then the APP judges the signal strength of the surrounding position Beacon, then sends it to the background to calculate and determine the approximate location of the mobile phone carrier and display it on the map. , When the user is moving, the real-time data calculation takes on the effect of indoor navigation, basically making it an ‘indoor GPS’. The user’s location information can also be obtained in the background, so that you know which areas are densely populated, and proper use of monitoring can divert people through discounts or activities, and you can also collect data on the favourite areas for users to attract more consumption data analysis.