MK19 nRF54L15 Module

  • Nordic® Semiconductor nRF54L15 SoC solution
  • Bluetooth 6.0 – 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
  • IEEE 802.15.4-2020 (Thread, Matter, Zigbee)
  • Proprietary 2.4 GHz (up to 4 Mbps data rates)
  • Arm® Cortex™-M33, 128 MHz
  • 1524 KB non-volatile memory (RRAM) and 256 KB RAM
  • Antenna(MK19A – PCB trace antenna, MK19B – u.FL connector)
  • 21 x 13.8 x 2.3mm (with shield)
  • -40 to 85°C (Extended Industrial temperature -40 to +105°C can be customized)

Product Instruction

MK19 is a powerful, highly flexible and cost-effective Bluetooth module based on world-leading Nordic® Semiconductor nRF54L15 SoC solution, which integrates an ultra-low power multi-protocol 2.4GHz radio and MCU functionality featuring a 128 MHz Arm® Cortex™-M33 processor, comprehensive peripheral set, and scalable memory configurations to 1.5 MB NVM and 256 KB RAM.


MK19 module follows the size and package of most MOKO Bluetooth modules such as the MK02 (nRF52832 SoC), MK07 (nRF52833 SoC), MK08 (nRF52840 SoC) and MK13 (nRF5340 SoC), allowing you to easily and quickly upgrade your hardware to the latest and powerful nRF54L15 Bluetooth solution without re-designing hardware.

MK19A

PCB antenna is used. No need to design another antenna. u.FL connector will not be mounted on the PCB.

MK19B

The PCB antenna is disabled. You need to select an external 2.4Ghz antenna to connect to the u.FL connector.

Product Specifications

Detail Description
Chip nRF54L15
Bluetooth Version Bluetooth 6.0
MCU ARM® Cortex®-M33, 128 MHz
RAM 256 KB
Flash 1524 KB non-volatile memory (RRAM)
Tx Power -46 dBm to +8 dBm, 1 dB step size from -10 dBm to +8 dBm
Receiver sensitivity -96 dBm sensitivity in 1 Mbps Bluetooth® LE mode
-104 dBm sensitivity in 125 kbps Bluetooth® LE mode
-101 dBm sensitivity in IEEE 802.15.4 with a 37 bytes packet length
Clock Control On-chip 128 MHz phase-locked loop (PLL) with internal oscillator
32MHz crystal oscillator
Embedded 32.768 kHz RC oscillator and external 32.768kHz crystal oscillator
Power Supply 1.7V to 3.6V DC
Power Regulator Switching regulator for DC/DC buck setup
Power Consumption Peak current 10.0 mA (BLE TX 1 Mbps @ +8 dBm and 3.0V)
3.0 uA (System ON IDLE with GRTC (XOSC) and 256 KB RAM)
0.6 uA (System OFF)
Antenna MK19A – PCB trace antenna
MK19B – u.FL connector
Quantity of Pin 34 half-hole pins and 4 round debug pad pins
GPIO 28
Operating Temperature -40 to 85°C
Extended Industrial temperature -40 to +105°C can be customized
Module Dimensions Length: 21mm±0.2mm
Width: 13.8mm±0.2mm
Height: 2.3mm+0.1mm/-0.15mm

Documentation

Type Title Date
Product Brief MK19 Bluetooth Module Datasheet-V1.0.pdf 2024-12-25