LoRa Wireless Specification
LORAWAN Module
MKL62BA/MKLC68BA
Protocol
LORAWAN V1.0.2 and BLE 4.0
LORA TX Power
Max 21dBm
LORA Antenna
IPEX interface antenna
MKL62ST-DT
LORAWAN®-Based Development Kit
Multiple communication protocols LORAWAN® V1.0.3 and BLE V4.0
Open-source firmware bring your product to market faster
Variety of peripheral interfaces
Arduino NANO connection is compatible
Support AT command to change parameters
PRODUCT INTRODUCTION
MKL62ST-DT is a small, open-source IoT development board specially designed for MOKO LORAWAN®-Based module MKL62BA.
The low-power SMT32 chip is used as the external MCU, and it is integrated with the Sensirion SHT30 temperature and humidity sensor. By running the demo application firmware provided by MOKO, users can quickly familiarize themselves with the LORA®-Based network and see the temperature and humidity sensor data on the LORAWAN®-Based network server.
Users also can connect different external sensors through a rich peripheral interface to quickly design and validate a LORA®-Based node device. Moreover, because the Arduino NANO connection is compatible, it will be easy to begin the LORA®-Basedapplication design process.
PRODUCT FEATURES
Supports standard LoRaWAN®-Based protocol
The power supply interface has a complete anti-surge, ESD, and anti-reverse connection, and other protective functions
Provides a lithium-ion battery connection interface, along with an integrated lithium battery charge and discharge management circuit
The CP2102 USB-UART chip provides serial port function to facilitate program downloading and debugging information printing
Provides a SMT32 and LoRaWAN®-Based module serial port program interface
Compatible with the Arduino NANO interface
Offers a variety of peripheral interfaces, including UART, GPIO, ADC, I2C, SPI, and NFC
Offers a variety of on-board peripheral SHT30 sensors, switches, and LEDs
SPECIFICATIONS
Physical Parameter
Dimension
80mmx36mmX12mm
Application Parameter
MCU
STM32L151C8T6A
Flash
64KB
RAM
32KB
Powerr Supply
3.7V rechargeable Li-battery or Type-C USB
Output Voltage
5V or 3.3V
Output Current
Max 500mA
Peripheral Interface
UART,GPIO,ADC,I2C,SPI,NFC
On-board Peripheral
SHT30 sensor,4xLED,2xswitch