Home / LoRaWAN®-Based Waste Bin Status Detection LW006-WB

LoRaWAN®-Based Waste Bin Detector

This LW006-WB sensor is designed for waste bin (trash bin) status detection. It detect full/empty, flame risk, inclined (fall) or not and etc.
With LoRaWAN® module, it transmit the status via gateway to networks server and application server. User can monitor the status remotely.
With the application software, user can assign the collector resource work plan and route plan. Analyze task performance and find out solution to improve. Finally the objective of high efficiency , good environment, and low cost are achieved. It is optional for different frequency, such as 470Mhz (China), 868Mhz (Europe), 915Mhz(USA), 923Mhz (Australia,New Zealand). As it is with algorithm of low power consumption, the internal battery can work for more than 5 years (at 4 hours interval upload interval).

Parameters:

Overview	Dimension	11511550mm
	Net Weight	150g
	Color	Black
	Shell Material	ABS
Detector	Principle	Ultrasonic @ 112kHz
	Detection Range	200cm (vertical)
	Accuracy of height	3mm
	Blind area	15cm
	Accuracy of temperature	2℃
	Accuracy of angel	2° (optional)
	MCU	STM32, 32bit ARM® core controller
	LoRa Module	Semtech® 1276
Controller	Sensitivity	-137dbm@292bps (RX), 5~20dbm(Tx)
Radio	Frequency	LoRaWAN® CN470/EU868/US915/AS923Mhz
	Working Mode	Class A
	Activation	ABP/OTAA activation;
	Communication Distance	3km in view sight;
	Lifetime for one charge	5 years at 4 hours report interval.
	Internal Battery	ER18505M non-recharged Lithium Battery
	Current	[email protected](uploading)
		-40 ~ +85℃
	Protection Level	IP66